Motorola XTNID Guide De L'utilisateur page 22

PROGRAMMING FEATURES
ENTERING PROGRAMMING MODE
To enter 'Programming Mode', press and hold
both the PTT button and the SB1 button
simultaneously for three seconds, while turning
ON the radio. A unique tone will sound,
indicating that the radio has entered
'Programming Mode' and the radio LED will
blink a green heartbeat. Once the radio enters
the 'Programming Mode', which defaults to
'Idle' Programming Mode, the radio LED will be
blinking green heartbeat.
Whenever you enter 'Programming Mode' the
PROG icon will be displayed and the current
channel aliasing name will be blinking to
indicate that you can select the channel you
want to program. You can scroll up/down to
20
English
All manuals and user guides at all-guides.com
select the different channels by pressing the
/ buttons.
In 'Programming Mode' your radio is capable
of setting values for each channel by moving
between the different programming modes
available: Frequencies, CTCSS/DPL codes
(Interference Eliminator Code), Scramble,
Bandwidth, Maximum Channels, Call Tone,
Microphone Gain and Scan.
• To move along the different Programming
Selection Modes without saving changes,
short press the PTT or MENU buttons.
• To save changes, long press the PTT
button. The radio will return to 'Idle'