JB Systems PARTY BAR Mode D'emploi page 18

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ENGLISH
000-004
005-009
22
010-255
000-004
005-127
23
128-133
134-255
000-004
005-009
24
010-255
000-004
005-009
25
010-255
000-004
005-009
26
010-255
000-004
005-009
27
010-255
Extra functions in the menu
 Press the [MENU] button until the display shows [SYS].
 Press the [ENTER] button if you want to enter this part of the menu with extra options.
 Use the [UP/DOWN] buttons to browse the extra functions in this System menu
o
[AddS] gives you the opportunity to change the command position of the 4 RGB projectors
IMPORTANT: if you set a wrong combination (same projector number selected several times) some
projectors might not work anymore.
If a projector does not work, first check if the command position is correct. STANDARD= 1-2-3-4
IMPORTANT: if you set a wrong combination (same projector number selected several
times) some projectors might not work anymore.
If a projector does not work, first check if the command position is correct.
STANDARD= 1-2-3-4
o
[LEdS] with this option you can decide if the display should be always on or if it can go out
after a while when no new information needs to be shown
JB SYSTEMS®
Blackout
ON
Strobe speed
(slow to fast)
Stop
Clockwise rotation
Stop
Anticlockwise rotation
White Flash Led Control
Blackout
Full on
Strobe Speed
(slow to fast)
Blackout
Full on
Strobe Speed
(slow to fast)
Blackout
Full on
Strobe Speed
(slow to fast)
Blackout
Full on
Strobe Speed
(slow to fast)
Press the [ENTER] button to enter the option settings
The position of the first projector will blink
Press the [UP] button to go the projector that needs its position to be changed
Press the [DOWN] button to change the position number of the projector
Press again the [UP] button if want to change the position number of another
projector
Repeat these steps as much as needed
When all your settings are done, press the [ENTER] button to confirm your settings.
Press the [ENTER] button to enter the option settings
16/87
USER MANUAL
Green Laser
Laser Motor
Led 1
Led 2
Led 3
Led 4
PARTY BAR

Hide quick links:

Publicité

Table des Matières
loading

Table des Matières