Télécharger Imprimer la page

Powersmart PS76822SRB Manuel D'instructions page 16

Publicité

Les langues disponibles

Les langues disponibles

TO REMOVE BATTERY PACK (See Figure 6)
• Release the mowing switch and drive switch to stop the product.
• Remove the safety key.
• Press and hold the battery latch button at the bottom of the battery pack.
Remove battery pack from the product.
OPERATING YOUR LAWN MOWER
STARTING/STOPPING THE MOWER (See Figure 7)
To start the mower:
• Install the battery pack and insert the safety key.
• Press the start switch with the right hand, wait until the power indicator comes on, press the
mowing switch with the left hand, wait 2-3 seconds, the machine starts, and the blade begins to
rotate. Just release the start switch, then you could start mowing forward.
To operate the mower:
• Press the start switch, the power indicator lights up, then press the drive switch, the mower moves
forward.
NOTE: If no other action is performed within 15 seconds after pressing the start switch,
press the start switch again!
• When mowing switch and drive switch are pressed at the same time, release the drive switch, the
mower will not stop walking.
• When mowing switch and drive switch are pressed at the same time, release the mowing switch,
the mower will stop walking.
• When mowing switch is not pressed, press the drive switch, mower will walk. Release drive switch,
the mower will stop walking.
Rotary speed switch to adjust the speed needed.
When the environment is dark, press the light switch.
Figure 7
16

Publicité

loading