Glatz PALAZZO STYLE Notice De Montage Et D'utilisation page 20

EN
3.2.1 How to operate the LED
Turning on/setting the light to maximum: Press channel key 1
Turning on/setting the light to 75 %: Press channel key 2
Turning on/setting the light to 50 %: Press channel key 3
Turning on/setting the light to minimum, approx. 25 %: Press channel
key 4
Turning on the light to minimum, approx. 25 %: Press channel key 5
Increasing luminosity: Press channel key 5 > the light is getting brighter
as long as you keep the key pressed or until the maximum is reached.
Reducing luminosity: Press channel key 6 > the light is getting darker as
long as you keep the key pressed or until the minimum is reached.
Turning off the light: Press channel key 7
3.2.2 How to operate the heater
Turning on heater 1 + 2: Press channel key 1
Turning off heater 1 + 2: Press channel key 2
Turning on heater 3 + 4: Press channel key 3
Turning off heater 3 + 4: Press channel key 4
The heater control is equipped with a safety function which releases the
activation of the heater only if the sunshade is completely open. The con-
trol sends out a signal tone indicating that the heater can be activated
now, or it turns off the heater if the sunshade is closed.
Without function: Channel keys 5, 6, 7
3.2.3 How to operate LED and heater
Turning on the light to maximum: Press channel key 7
Turning on the light to minimum, approx. 25%: Press channel key 5
Increasing luminosity: Press channel key 5 > the light is getting brighter
as long as you keep the key pressed or until the maximum is reached.
Reducing luminosity: Press channel key 6 > the light is getting darker as
long as you keep the key pressed or until the minimum is reached.
Turning off the light: Press channel key 7
Turning on the heater: Press channel key 1
Turning off the heater: Press channel key 2
The heater control is equipped with a safety function which releases the
activation of the heater only if the sunshade is completely open. The con-
trol sends out a signal tone indicating that the heater can be activated
now, or it turns off the heater if the sunshade is closed.
Without function: Channel keys 3, 4
3.2.4 How to operate LED and motor
Turning on the light to maximum: Press channel key 7
Turning on the light to minimum, approx. 25%: Press channel key 5
Increasing luminosity Press channel key 5 > the light is getting brighter
as long as you keep the key pressed or until the maximum is reached.
Reducing luminosity: Press channel key 6 > the light is getting darker as
long as you keep the key pressed or until the minimum is reached.
Turning off the light: Press channel key 7