Eneo VTL-300/WW-POE Instructions De Montage page 13

2. General Description
Focussing on rapid installations and assuring proven reliability, Videor E. Hartig GmbH present a new HiPoE camera
housing solution with Dual Fast IP connections.
The using of the POE Injector-01 (optional accessory, Art. No. 79707)
The new HiPoE camera housing is equipped with both, RJ45 and Punch Down Terminal. Fast connection systems
offering the installer a choice of the most suitable solution.
Having selected the fast connection, the installation is complete. The pre-assembled internal CAT5e with the RJ45
male plug termination makes this a real Plug & Play solution.
The Dual Fast IP connections HiPoE camera housing has been engineered with built-in flexibility to host and allow any
kind of digital camera, with or without PoE options, to work seamlessly in a HiPoE CCTV ystem.
If you want to supply an IP (but not PoE) camera please use the two terminal blocks (output selectable +VDC or
4.5VDC) and two wires from the splitter to the camera for the power supply and a separate CAT5e cable for the data.
2.1 Main Features
• Network camera weatherprotection
• Humidity protected cable feed-through
• Integrated PoE splitter (VDC/.75A resilient)
• Fold-down housing body
• Insulated camera mounting
• Housing body length: 00mm
• Integrated wall bracket
• Cable entry through the wall bracket
• Thermostatically controlled window heater & blower (VTL-300/WW-POEB, Art. No. 79705)
Thermostatically controlled window heater (VTL-300/WW-POE, Art. No. 79706)
• Protection rating: IP54 (VTL-300/WW-POEB, Art. No. 79705)
IP66 (VTL-300/WW-POE, Art. No. 79706)
• Colour: RAL900
• Accessory: PoE injector (Art. No. 79707) - optional