B3980
EXTRA: In case you should not make it home in time, the breadmaker will continue
to heat the bread for another 60 minutes. This additional time is not included in the
program time.
HOW TO USE THE TIME DELAY FUNCTION
When you want to use the time delay function, you should program it before you press
the start button.
IMPORTANT: never use the time delay function with easily perishable ingredients.
Please carry out the first 8 steps, as described in the chapter "Operating instructions".
Next, after having selected the program and the crust colour of your choice, you press
the "time +" or "time -" buttons in order to adjust (decrease or increase) the time set
on the display. Cf. chapter "display".
Example: the time is 9 am and you want your bread to be ready by 5 pm. Put all
ingredients in the bread pan. Place the bread pan in your breadmaker. Close the lid and
select the program and the crust colour of your choice, using the respective buttons.
Keep pressing the button with the arrow pointing up until you see "8.00" on the
display. For, evidently, 8 hours will pass between the time you press the start button
and the time you want your bread to be ready (in this case 5 pm).
Press the start button. The colon on your display will start to flash and the breadmaker
will start the countdown, until it is time for the breadmaker to begin the kneading. The
breadmaker will let the program run entirely, ensuring the bread will be ready at the
desired time.
HOW TO CLEAN YOUR BREADMAKER
Before cleaning your breadmaker, please ensure it is no longer activated, it has
sufficiently cooled down and the plug has been disconnected from the power socket.
Exterior
Clean the outside of your appliance and its viewing window with a damp cloth or a
sponge. Take out the bread pan before you start cleaning. If necessary, you can clean
the exterior of the appliance with a mild detergent.
Interior
Gently clean the inside of the appliance with a lightly damp cloth. Be careful when
cleaning the heating element.
Bread pan
You can clean the bread pan with warm water. Be careful not to damage the non-stick
coating. In case the kneading paddle gets stuck, allow the bread pan to cool down
completely. Next, gently pour a little bit of warm water into the bread pan until the
kneading paddle is under water. The sticky bits will dissolve and you will be able to
60