HEBU medical HBS x-touch 200i Mode D'emploi page 56

EN
11.3 Servicing and manufacturer address
Should you require the instructions for use in paper form, please use the contact details below. The
instructions for use in paper form will be made available to you within seven calendar days of receipt
of the request.
Alternatively, you can print out the electronic instructions for use yourself.
HEBUmedical GmbH
Badstraße 8
78532 Tuttlingen / Germany
Tel. +49 7461 94 71 - 0
Fax +49 7461 94 71 - 22
eMail: service@HEBUmedical.de
Web: www.HEBUmedical.de
12 System maintenance work
12.1 Cleaning
The electrosurgical unit can be wiped using a cloth dampened with standard disinfectant, and so kept
clean using the simplest possible method. Avoid allowing cleaning fluid and disinfectant to penetrate
into the unit.
12.2 Fuses
The fuse sockets are located on the back of the unit. The unit works with two fuses of 6.3 A each.
Exchanging the fuses:
◼
Disconnect the unit from the mains
◼
Release the fuse from the retainer using a flat blade screwdriver
◼
Exchange the fuse
After an exchange of fuses, the unit must be checked by suitably qualified personnel.
12.3 Transport
Prevent mechanical damage and moisture.
If the unit has been stored for a long period in a cold environment, wait before removing the protective
packaging until the unit has reached room temperature.
During transportation, the standard safety measures additionally apply.
Only ever transport the unit in its original packaging.
56
HBS x-touch 200i