HEBU medical HBS x-touch 200i Mode D'emploi page 42

EN
7 Accessories
7.1 Accessories for the monopolar operating mode
Handles for monopolar electrodes can be connected to the unit using a 2-pin standard or MARTIN
plug or using the 4 mm plug (banana plug) with only one contact.
3-pin standard plug
Neutral electrode
The HBS x-touch 200i reliably detects neutral electrodes with undivided and divided contact surface.
A comparison of the electrode detected by the machine and the used electrode provides a direct
indication of correct adhesion of the neutral electrode. Both single-use and reusable neutral
electrodes can be used.
42
Apply for a copy of our extensive
electrosurgery accessories catalogue today!
MARTIN monopolar
Valleylab plug for the neutral electrode
HEBUmedical recommends the use of the single-use safety
neutral electrode with double divided contact surface
(HF 9564) for maximum safety!
plug
HBS x-touch 200i
Monopolar 4mm 1-pin plug
(banana plug)