COMPLIANCE
The meter has earned the European CE Mark and UKCA Mark of Compliance for
electromagnetic compatibility and safety. The Declaration of Conformity for the 2020t/i BLE
colorimeter is available at www.lamotte.com.
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interferences in which case the user will be required to correct
the interference at his own expense. Protection provided within the system may be impaired
if the device is used in a manner for which it is not intended.
IP67 COMPLIANCE
The 2020t/i BLE meets IP67 standards for protection against dust and immersion only
when the USB port plug is in place. Documentation is available at www.lamotte.com.
WARRANTY
LaMotte Company warrants this instrument to be free of defects in parts and workmanship
for 2 years from the date of shipment. Keep the proof of purchase for warranty verification. If
it should become necessary to return the instrument during or the warranty period, contact
our Technical Service Department at 1-800-344-3100 or 1-410-778-3100, ext. 3 or
softwaresupport@lamotte.com for a return authorization number or visit www.lamotte.com
for troubleshooting help. The sender is responsible for shipping charges, freight, insurance,
and proper packaging to prevent damage in transit. This warranty does not apply to defects
resulting from action of the user such as misuse, improper wiring, operation outside of
specification, improper maintenance or repair, or unauthorized modification. LaMotte
Company specifically disclaims any implied warranties or merchantability or fitness for a
specific purpose and will not be liable for any direct, indirect, incidental, or consequential
damages. LaMotte Company's total liability is limited to repair or replacement of the product
with a new or refurbished meter as determined by LaMotte Company. The warranty set forth
above is inclusive and no other warranty, whether written or oral, is expressed or implied.
DEVICE CONNECTION
The meter supports connections to a Windows based PC over USB (Code 1720-01).
COMPUTER CONNECTION
USB Type A, USB mini B, Order Cable Code 1720-01
CONNECTING VIA USB
Using the provided USB cable, the meter can be connected to a Windows based PC. Before
connecting a meter via USB, download and install the free WaterLink Connect 2 Windows
application from http://softwarecenter.lamotte.com.
CONNECTING VIA BLUETOOTH
The meter uses Bluetooth Low Energy technology to allow communication between the
meter and the BLE Mobile Printer (Code 5-0067) only. The meter will automatically connect
to the nearest Bluetooth enabled printer. Barriers to wireless signals can reduce the range of
wireless devices. The meter will work best if there are no walls between it and the receiving
device.
WATERLINK CONNECT 2
The meter may be interfaced with any Windows-based 64-bit computer by using the
LaMotte WaterLink Connect 2 program and a USB cable. The program will store test
information and results in a local database and allow for exporting this data to a comma
separated value (CSV) file. The meter will send the following data: name of test, sample
value, sample units, time/date stamp, and meter name. To download WaterLink Connect 2
go to http:// softwarecenter.lamotte.com/. Select "WaterLink Connect 2 FREE Download".
7