Publicité
Les langues disponibles
Les langues disponibles
6.
Press
desired setting.
7.
Press
ENTER
The screen will display Storing... for
about 1 second and return to the
Setup Menu.
„ SETTING THE BACKLIGHT TIME
The backlight illuminates the display for enhanced viewing. If Button Control is chosen the
backlight button on the key pad will act as an on/off switch and the backlight will remain on
or off when the meter is being used. When one of the other settings – 10, 20 or 30 seconds
– is chosen, the display will be illuminated for the specified amount of time after any button
is pressed. As a precaution, the backlight will not illuminate during turbidity measurements
to avoid interference from stray light.
NOTE: The backlight feature uses a significant amount of power. The longer the backlight is on, the more
frequently the battery will have to be charged if the USB/Wall Charger is not being used.
1.
Press and briefly hold
the meter on. The LaMotte logo screen
will appear for about 3 seconds and
the Main Menu will appear.
2.
Press
3.
Press
ENTER
or
to scroll to
to save the selection.
to turn
to scroll to Setup Menu.
to select Setup Menu.
Set Power Save
Disable
5 Minutes
15 Minutes
30 Minutes
12:00:00 p
Setup Menu
Set Clock
Logging
Factory Setup
Set Power Save
12:00:00 p
Main Menu
Measure Menu
Setup Menu
12:00:00 p
Main Menu
Main Menu
Setup Menu
12:00:00 p
Setup Menu
Turbidity Options
Auto Calibration
Set Clock
Logging
12:00:00 p
21
1/500
1/500
1/500
1/500
1/500
Publicité
