Milwaukee M18 ONEFLT Notice Originale page 11

TECHNICAL DATA
Type
Production code
Battery voltage
Frequency band(s) of Bluetooth
Radio-frequency power
Bluetooth version
Pull force
Tool stroke length
Lockbolt Fastener Sizes
Material
Weight according EPTA-Procedure 01/2014
(Li-Ion 2,0 Ah ... 12,0 Ah)
Recommended Ambient Operating Temperature
Recommended battery types
Recommended charger
Noise information: Measured values determined according to EN
62841. Typically, the A-weighted noise levels of the tool are::
Sound pressure level / Uncertainty K
Sound power level / Uncertainty K
Wear ear protectors!
Vibration information: Vibration total values (triaxial vector sum)
determined according to EN 62841
Vibration emission value a / Uncertainty K
h
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardized test given in
EN 62841 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration and noise emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the vibration and noise emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration and/or noise such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
WARNING!
Read all safety warnings, instructions,
illustrations and specifications provided with this power tool. Failure
to follow all instructions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
SAFETY WARNINGS LOCKBOLT TOOL
Hold the power tool by insulated gripping surfaces when per-
forming an operation where the fastener may contact hidden
wiring. Fasteners contacting "live" wire may make exposed metal
parts of the power tool "live" and could give the operator an electric
shock.
Use protective equipment. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-
slip footwear, helmet and ear defenders.
Have damage repaired immediately by an authorised workshop.
Remove the battery pack before starting any work on the
appliance.
To avoid injury and damage, never immerse the tool, removable
battery or charger in liquid or allow liquid to penetrate them.
•Always use mandrel collector. Spent mandrels can be ejected from
the tool, causing injury.
• Chemical Burn Hazard. Keep coin cell battery away from children.
• For best results, use only with energy absorbing lanyards. Ropes,
straps or chains may break and cause failure. Do not use with
lanyards at full tension.
20
M18 ONEFLT
Lockbolt Tool
4839 45 01 XXXXXX MJJJJ
18 V
2402 - 2480 MHz
1,8 dBm
4.2 BT signal mode
20000 N
30,0 mm
4,8 mm (3/16");
6,4 mm (1/4");
9,53 mm (3/8") (only Hucktainer
Aluminium
Steel
Stainless steel
2,5 ... 3,6 kg
0 ... +50 °C
M18B...; M18HB...
M12-18...; M1418C6
81 dB (A) / 3dB (A)
92 dB (A) / 3dB (A)
< 2,5 m/s 2 / 1,5 m/s 2
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
WARNING! To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside them. Corrosive or
conductive fluids, such as seawater, certain industrial chemicals,
and bleach or bleach containing products, etc., Can cause a short
circuit.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
WARNING! This device contains a button-type/coin cell lithium
battery. A new or used battery can cause severe internal burns and
lead to death in as little as 2 hours if swallowed or if it enters the
body. Always secure the cover on the battery compartment. If it does
not close securely, stop the device, remove the battery and keep it
out of reach of children. If you believe that someone has swallowed
the battery or that it has otherwise entered the body, seek immediate
medical attention.
SPECIFIED CONDITIONS OF USE
The lockbolt tool is sold without a nosepiece assembly (inner and
outer nosepiece) which is necessary for working with the tool.
For each Lockbolt type and size a separate Huck® nosepiece
assembly must be purchased.
For Hucktainer® Lockbolts the Milwaukee M18 ONEFLT-HT outer
ENGLISH
housing is needed additionally.
The tool is specially designed for the usage of Bobtail®, C6L®,
C120L®, MagnaGrip® and Hucktainer® Lockbolts.
HUCK®, HUCKTAINER®, MAGNA-GRIP®, C6L®, C120L® and
BOBTAIL® are the trademarks of Huck International Inc. and
Howmet Aerospace Inc. respectively.
Do not use the product in any way other than those stated for
intended use.
RESIDUAL RISK
Even when the product is used as prescribed, it is still impossible
to completely eliminate certain residual risk factors. The following
hazards may arise in use and the operator should pay special
)
®
attention to avoid the following::
• Injury caused by vibration. Hold the product by designated
handles and restrict working time and exposure.
• Exposure to noise can cause hearing injury. Wear ear protection
and limit exposure.
• Injury due to flying debris. Wear eye protection, heavy long
trousers, gloves and substancial footwear at all times.
• Inhalation of toxic dusts.
NOTES FOR LI-ION BATTERIES
Use of Li-Ion batteries
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of
the battery pack. Avoid extended exposure to heat or sunshine (risk
of overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged,
after use.
To obtain the longest possible battery life remove the battery pack
from the charger once it is fully charged.
For battery pack storage longer than 30 days::
Store the battery pack where the temperature is below 27°C and
away from moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
Battery protection for Li-Ion batteries
In extremely high torque, binding, stalling and short circuit situations
that cause high current draw, the tool will vibrate for about 5
seconds, the fuel gauge will flash,and then the tool will turn OFF.
To reset, release the trigger. Under extreme circumstances, the
internal temperature of the battery pack could raise too much. If
this happens, the fuel gauge will flash until the battery pack cooled
down. After the lights go off, the work may continue.
Transporting Lithium Batteries
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with
local, national and international provisions and regulations.
The user can transport the batteries by road without further
requirements.
Commercial transport of Lithium-Ion batteries by third parties is
subject to Dangerous Goods regulations. Transport preparation and
transport are exclusively to be carried out by appropriately trained
persons and the process has to be accompanied by corresponding
experts.
When transporting batteries::
Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
Ensure that battery pack is secured against movement within
packaging. Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice.
ONE-KEY™
To learn more about the ONE-KEY functionality of this device,
please refer to the Quick Start guide included with this product or go
to http://www.milwaukeetool.com/one-key.
To download the ONE-KEY app, visit the App Store or Google Play
from your smart device.
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset manually
to recover.
ONE-KEY™ indicator
Solid Blue: Wireless mode is active and ready to be configured via
the ONE-KEY™ app.
Blinking Blue: Tool is actively communicating with the ONE-KEY™
app.
Blinking Red: Tools is in security lockout and can be unlocked by the
owner via the ONE-KEY™ app.
CLEANING
The ventilation slots of the machine must be kept clear at all times.
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts. Should
components need to be replaced which have not been described,
please contact one of our Milwaukee service agents (see our list of
guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please
state the Article No. as well as the machine type printed on
the label and order the drawing at your local service agents or
directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10,
71364 Winnenden, Germany.
ENGLISH
21