13. AUX In 1 mode
13.1
Operation
Your external player (e.g. Blu-ray player) must be connected to the auxiliary
input jack 1 of PRIMUS with an audio cable (with RCA connector, not
supplied).
To access the AUX In
1 mode,
To start and control
playback,
To mute or restore
the sound output,
13.2
Setup menu
Press SETUP in the AUX In 1 mode to access the setup menu (see chapter "Using
the menus"). The following options are available and the current settings (if
applicable) are marked with an asterisk (*).
[Bluetooth headphone]
•
To connect or disconnect with a Bluetooth headphone, see chapter "Basic
operation".
[System Settings]
•
See chapter "System Settings".
[Main menu]
•
To access other playback modes, alarm or sleep timer.
© sonoro audio GmbH 2021
Press AUX key on PRIMUS to toggle AUX In. 1
mode.
Or press
key on the remote control.
Or, press MENU once, then
(or rotate the navigation knob) to select the
AUX In 1 mode and then press OK to confirm.
Perform all playback operations on the
external player.
Press
or
button.
or
.
95
GB