Sonoro PRIMUS SO-340 Mode D'emploi page 102

18.4 Network
[Network wizard]
•
To establish network connection.
[WPS WLAN Setup]
•
Select this option if your wireless router supports both WPS and PBC setup
methods.
[View Settings]
•
To view the current network information.
[WLAN Region]
•
To select a WLAN region.
[Manual Settings]
•
Under the [Wireless] option, select [DHCP enable] to allocate IP address
automatically or [DHCP disable] to do it manually.
[NetRemote PIN setup]
•
To set up a NetRemote PIN.
[Network Profile]
•
To display a list of networks saved by PRIMUS.
[Clear Network Setting]
•
To clear all network settings.
[Keep Network Connected]
•
To keep the WiFi network connected or not. If [YES] is selected, this allows
you to wake PRIMUS from standby using a remote app. If [NO] is selected,
this will switch OFF the WiFi network connection in standby mode.
18.5 Time/date
[Set Time/Date]
•
To set time and date.
[Auto Update]
•
To select a source (Radio, Internet network or no update) for automatic time
update.
If you are updating time from a source (Radio – FM/DAB), the daylight
•
saving setting has no effect.
If you are updating time from the Internet network, set your time zone.
102 © sonoro audio GmbH 2021