Publicité
Les langues disponibles
Les langues disponibles
36
www.electrolux.com
For alarm codes not described in the
table, contact an Authorised Service
Centre.
12.1 The washing and drying results are not satisfactory
Problem
There are whitish streaks or
bluish layers on glasses and
dishes.
There are stains and dry wa-
ter drops on glasses and
dishes.
The dishes are wet.
13. TECHNICAL INFORMATION
Dimensions
Electrical connection
Water supply pressure
Water supply
Capacity
Power consumption
Power consumption
1) Refer to the rating plate for other values.
2) f the hot water comes from alternative source of energy, (e.g. solar panels, aeolian energy),
use the hot water supply to decrease energy consumption.
14. ENVIRONMENTAL CONCERNS
Recycle the materials with the symbol
Put the packaging in applicable containers
to recycle it. Help protect the environment
and human health and to recycle waste of
Refer to "Hints and tips" for
other possible causes.
1)
Possible solution
• The release quantity of rinse aid is too much. Adjust
the rinse aid selector to a lower position.
• The quantity of detergent is too much.
• The released quantity of rinse aid is not sufficient.
Adjust the rinse aid selector to a higher position.
• The quality of the rinse aid can be the cause.
• The programme does not have a drying phase or
has a drying phase with low temperature.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the cause.
• The quality of the multi-tablets can be the cause. Try
a different brand or activate the rinse aid dispenser
and use rinse aid and multi-tablets together.
Width / height / depth
(mm)
Voltage (V)
Frequency (Hz)
Min. / max. bar (MPa)
Cold water or hot water
Place settings
Left-on mode (W)
Off-mode (W)
electrical and electronic appliances. Do
.
not dispose appliances marked with the
symbol
596 / 818-898 / 550
220 - 240
50
0.5 (0.05) / 8 (0.8)
max 60 °C
2)
13
0.99
0.10
with the household waste.
Publicité
