Publicité
Les langues disponibles
Les langues disponibles
ADDING RINSE AID
The rinse aid helps to dry the dishes without streaks and stains. It is automatically released during the hot
rinse phase.
DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance.
Make sure that the appliance is in programme
selection mode.
•
If the salt indicator is on, fill the salt
container.
ADDING DETERGENT
If the programme has a prewash phase, put a small quantity of detergent also in compartment B.
ADDING MULTI-TABLETS
•
Adjust the water softener to the lowest level.
THE AUTO OFF FUNCTION
This function decreases energy consumption by
deactivating automatically the appliance when it is
not operating.
1
2
1
2
1
2
•
If the rinse aid indicator is on, fill the rinse
aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme for the
type of load and the degree of soil.
A
B
The function comes into operation:
•
5 minutes after the completion of the
programme.
•
After 5 minutes if the programme has not
started.
25
Publicité
