Harvia Spirit HSPE604M Instructions D'installation Et Mode D'emploi page 36

EN INSTRUCTIONS FOR INSTALLATION
See WARNINGS AND NOTES!
See INSTALLATION IMAGES!
Technical data
Installation details
EN
Dimensions
Sauna room
Approved accessories
Suitable control units
Before installation
Before installing the heater, study the instructions for installation. Check the following points:
• Is the output and type of the heater suitable for the sauna room? The cubic volumes must be followed > Technical
data .
• Is the supply voltage suitable for the heater?
• The location of the heater fulfils the minimum requirements concerning safety distances > Technical data, >
Installation Images: 2. Safety distances.
Note! Only one electrical heater may be installed in the sauna room. The heater should be installed so
that the warning texts can be read without difficulty after the installation.
Safety distances
The minimum safety distances are shown in figure 2.
It is absolutely necessary to install the heater according to these values. Neglecting them causes a
risk of fire.
36
Max. power
Operating voltages
Frequency
Supply cord
Connection cable type
Protection class
Weight kg
Stones
Storage temperature
Height
Width
Depth
Volume m³
Sauna room height min. mm
Embedding flange
Safety railing
HSPE604M / HSPE904M: C150400, C150400VKK, CX170400, CX110400, CS110400, CF9400,
C170400VKK, C090400
HSP604MXW / HSP904MXW: CX110XW
(See the latest control unit models in our website www.harvia.com.)
HSPE604M
HSP604MXW
6 kW
50 / 60 Hz
400 V 3N~ 5 x 1,5 mm²
230 V 1N~ 3 x 6 mm²
230 V 3~ 4 x 1,5 mm²
H07RN-F or equivalent
11 kg
Ø 5–10 cm / 60 kg
687 mm
385 mm
334 mm
5-8 m³
1900
HSPE904M
HSP904MXW
9 kW
400 V 3N~
230 V 1N~
230 V 3~
50 / 60 Hz
5 x 2,5 mm²
3 x 10 mm²
4 x 2,5 mm²
IPX4
12 kg
0-50 °C
687 mm
385 mm
334 mm
8-14 m³
1900
HSP1
HSP3M