topmark FENN T7008 Mode D'emploi page 13

TO OPEN STROLLER
Release folding latch and open the frame, then step down the base lock until it is
fully locked.
FRONT WHEEL ASSEMBLY
Before assembly to the front legs, make sure that the lock mechanism is well
attached each of the front wheel before assembly. Hold one front frame leg, push
the whole of front wheel set until covered with front leg tube and the wheels come
to a stop. Repeat on the other side of front wheels.
FITTING CANOPY
Put canopy hoop front into position and buckle both sides
onto handle tube and also buckle the Velcro on both handle
tubes behind canopy.
ASSEMBLING
13
EN