Within the next 10 seconds set the required cooking
3.
time with the twist knob.
a The cooking time counts down. If you have set a
cooking time for more than one hotplate, the cook-
ing time of the hotplate selected is displayed.
a When the cooking time has elapsed, the hotplate
switches off. An audible signal sounds and
up in the hotplate display.
display for one minute. The
Note: If you touch any touch field, the displays go out
and the audible signal ceases.
Changing or cancelling the cooking time
1.
Select the hotplate using the twist knob.
Touch
and change the cooking time or set to .
2.
Automatic timer
You can use this function to preselect a cooking time
for all hotplates. Each time a hotplate is switched on,
the preselected cooking time counts down. When the
cooking time has elapsed, the hotplate switches off
automatically.
Switch on the automatic timer in the basic settings.
→ Page 36
Tip: The automatic timer is valid for all hotplates. You
can reduce or delete the cooking time for individual
hotplates. → Page 34
9 Automatic switch-off
If you do not change the settings of a hotplate for a
long time, automatic switch-off will be activated.
When the hotplate switches off depends on the heat
setting selected (1 to 10 hours).
The heat to the hotplate is switched off.
sidual heat indicator / flash alternately on the hot-
plate display.
10 Keep-warm function
The keep-warm function allows you to melt chocolate
or butter and to keep food or cookware warm.
10.1 Switching on the keep-warm function
Select the hotplate.
1.
lights
flashes in the timer
display flashes.
and the re-
8.2 Kitchen timer
You can set a time of up to 99 minutes after which a
signal will then sound. The kitchen timer runs inde-
pendently of all other settings.
Setting the kitchen timer
Touch
.
1.
above the touch field
a
lights up on the timer display.
a
Use the twist knob to set the time.
2.
a The timer starts counting down after a few seconds.
a A signal sounds when the time has elapsed.
flashes in the timer display.
lights up brightly.
a The display switches off after one minute.
Switching off the timer signal
You can switch the signal off manually.
Touch any touch field.
▶
a The display goes out and the audible signal ceases.
Setting the correct time
Touch the touch field
▶
set the time.
8.3 Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the stop-
watch function is switched off as well.
Switching on the stopwatch function
Touch
.
▶
appears in the timer display.
a
a Time measurement begins.
a Seconds are displayed during the first minute, then
minutes.
Switching off the stopwatch function
Touch
again.
▶
a The timer display goes out.
9.1 Continuing cooking after automatic
switch-off
Touch any touch field.
1.
a The display goes out.
Reset.
2.
Touch the symbol.
2.
lights up on the heat setting display.
a
10.2 Switching off the keep-warm function
Select the hotplate.
1.
Automatic switch-off en
flashes.
above the touch field
and use the twist knob to
35