Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the
following:
Read all instructions before using this machine:
DANGER – To reduce the risk of electric shock:
Always shut off and unplug this machine from the electrical outlet immediately after using
and before cleaning.
WARNING – To reduce the risk of burns, fire, electric shock, or injury to persons:
1. The machine should never be left unattended when plugged in. Unplug from outlet when not
in use and before maintenance or repair of the machine.
2. Close supervision is necessary when this appliance is used by, on, or near children, invalids,
or disabled persons. Keep children away from the treadmill belt.
3. Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
4. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or
has been damaged. For repair, use only authorized and trained technicians.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors.
8. Do not operate where aerosol (spray) products are being used or where oxygen is being
administered.
9. To disconnect, turn all controls to the off position, then remove plug from outlet.
10. Connect this appliance to a properly grounded outlet only. See Grounding Instructions.
FOR HOUSEHOLD USE ONLY
1. Care has been taken to assure that your equipment has been properly adjusted and
lubricated at the factory. It is not recommended that the user attempt service on the internal
components. Instead, seek service from an authorized service center. However, you may clean
the outer surface. Use a soft cloth, dampened with warm water. Do not use aerosol sprays
or pump bottles as they may deposit sediments upon the console surface. The use of harsh
chemicals will destroy the protective coating and cause a static build-up that may damage
some of the components.
2. This product has a circuit breaker that will shut the machine down completely when it reaches
a set Amperage. The button on the breaker will pop out when the breaker is engaged. The
breaker needs to be reset for the machine to function. Resetting the breaker can be done by
pushing in the beaker button next to the power cord on the machine.
6
Publicité
