BH S7TiB Manuel Du Propriétaire page 16

STEP 1 (this step will require two people)
Take the treadmill and the parts from the carton. Take the right upright post and
connect the wire on the bottom of the post with the wire in the bracket at the front right
of the machine. After connecting the wires, slide the right upright post into the right
bracket. Make sure not to pinch the wires. Take the left upright post and place it in the
left bracket. Secure the posts with 4 pcs of Bolts (16) that go on the back of the upright
posts, 4 pcs Bolts (24) that go in the bottom 2 holes on each post, and 2pcs Bolts (15)
that go in the top hole on each post. Leave them hand tight.
Left Upright Post
16
15
24
16
ASSEMBLY INSTRUCTIONS
16
15
24
Right Upright Post