BH S7TiB Manuel Du Propriétaire page 18

STEP 3 (this step will require two people)
Connect the wire in the right upper end of the upright post with the wire from the
bottom right console tray bracket. Slide the left and right console tray brackets into the
upright posts. Align the holes in the console tray brackets with the upright post holes
and secure them with 4pcs of Bolts (16).
TIP: If you are having trouble getting the console tray into the upright posts, make sure
that the screws at the bottom of the upright posts are loose. This gives some play in the
upright posts and you can seat the console tray more easily.
Console Tray
16
Left Upright Post
Right Upright Post
16
18