switel DET 367 Serie Mode D'emploi page 32

Resetting the handset (delivery state)
☞
The handset will be resetted to the delivery state - the entries in the
phonebook, the caller list and the redial list will be deleted.
... press, select HANDSET using ¦ / ‹ and press
¦ / ‹
Select RESET and press
Confirm the safety request by pressing
delivery state).
Dialling mode (Tone / Pulse)
☞
You can switch the dial mode. In most situations the TONE option
should be selected.
... press, select BASE using ¦ / ‹ and press
¦ / ‹
Select DIAL MODE and press
¦ / ‹
Select TONE or PULSE and press
or
... press and hold for approx. 3 s. T (Tone) or P (Pulse) appears in the
display.
Flash time
☞
You can set the flash time to 100 ms (usually for special services of
your telephone provider/delivery state) or 300 ms (e. g. for a telephone
exchange). In case of questions please contact your telephone provider or
the system administator of your PBX.
... press, select BASE using ¦ / ‹ and press
¦ / ‹
Select RECALL and press
¦ / ‹
Select SHORT or LONG and press
or
... press and hold for approx. 3 s. S (100 ms) or L (300 ms) appears in
the display.
System PIN
☞
In delivery state the PIN is set to "0 0 0 0".
The PIN is valid for all registered handsets.
... press, select BASE using ¦ / ‹ and press
¦ / ‹
Select SYSTEM PIN and press
Enter the old PIN and confirm by pressing
Enter the new PIN twice and confirm each by pressing
6
.
.
and enter the PIN (0 0 0 0 in
.
.
.
.
.
.
.
.
.
.
Registering a handset
☞
Five handsets can be registered to a base station. The handsets deli-
vered with your telephone are already registered. To register a "foreign"
handset please refer to it's user manual.
... press, select REGISTER using ¦ / ‹ and press
¦ / ‹
Select a base station to subscribe to and press
Enter the base's PIN (DET 367x base station in delivery state "0 0 0 0") .
Press and hold the paging key at the basestation for approx. 10 s. The
LED will begin to flash. After this the base station will be in regis-
tration mode for one minute.
Deleting a handset
☞
You can delete a handset from a base to allow another handset to be
registered. Note: you can only remove other handset in your system but
you are not able to remove the handset you are using.
... press, select DE-REGISTER using ¦ / ‹ and press
... press and hold
Enter the PIN for the base station (DET 367x base station „0 0 0 0").
Enter the internal telephone number (1...5) of the handset you want to
remove.
7 Answering Machine
The integrated digital answering machine offers a total recording time of up to
11 minutes for outgoing and incoming messages
Self recorded memos are treated like messages.
You can operate the answering machine at the base station. An internal voice
will give you advices. You can switch the language from german to french.
Using a telephone with tone dialling (DTMF) you have also a PIN protected
remote access.
You can select between two modes:
- Answer and record
- Answer only.
A standard announcement is already saved for every operating type at the
delivery stage. Therefore the answering machine is immediately operational.
At "Answer and record" and reaching of the maximum recording capacity the
device will automatically switch to the operating type "Answer only".
.
.
for approx. 3 seconds.
.