Klarstein BARELLA Mode D'emploi page 29

TROUBLESHOOTING
Problem
The light goes on but
the motor does not run.
The light and the motor
are not working.
The light does not work.
Unsatisfactory exhaust
performance.
The hood is
hanging awry.
CLEANING AND CARE
Before servicing or cleaning, the cooker hood should always be disconnected
from the power supply. Make sure the cooker hood is off and the plug has been
removed. External surfaces are prone to scratches and dents, so follow the
cleaning instructions to get the best results without damage.
General
Allow the unit to cool completely before cleaning and caring for the device, and do
not use alkaline or acidic substances such as lemon juice or vinegar to clean the
surface.
Possible cause
The motor is
switched off.
The motor switch
is broken.
The motor is broken.
Your house fuse is
flipped or broken.
The power cord is loose
or not connected.
The light is broken.
The distance between
the stove and extractor
hood is too great.
One of the fixing
screws is not
tightened properly.
Solution
Switch on the motor
with the SPEED button.
Contact a specialist.
Contact a specialist.
Replace the fuse switch
or replace the fuse.
Connect the power
cord properly.
Replace the bulb.
Reduce the distance.
Tighten the screw
properly.
EN
29