Publicité
Les langues disponibles
Les langues disponibles
EN
26
INSTRUCTIONS FOR INSTALLING
THE EXHAUST PIPE
The following rules must be strictly adhered to in order to achieve optimal air
extraction:
•
Make sure that the exhaust pipe is as short and straight as possible.
•
Do not reduce the size and do not restrict the exhaust pipe. When using
exhaust pipes, the pipe must always be laid tightly in order to minimize the
pressure loss.
•
Failure to follow these basic instructions will reduce performance and increase
the noise level of the cooker hood.
•
All installation work must be carried out by a qualified electrician or other
qualified person.
•
Do not connect the exhaust pipe of the hood to an existing ventilation system
that is used for another unit, such as a ventilation system, such as a flue, gas
pipes or hot air pipes.
•
If the exhaust pipe makes a bend, the angle of the exhaust pipe should not be
less than 120 °. Never align the exhaust pipe downwards, but always align it
horizontally or guide the pipe from the starting point upwards to the air outlet
on the outer wall.
•
After installation, make sure that the cooker hood is horizontal so that no
grease can accumulate.
•
Make sure that the exhaust pipe selected for the installation complies with the
relevant standards and is fire resistant.
CAUTION
Risk of injury. For safety reasons, use only the size of fixing or
mounting screws recommended in this manual. Failure to follow
these instructions may result in injury or electric shock.
Publicité
