Domo DO-414KT Mode D'emploi page 15

DO-414KT
- The indicated power of the extenion cord needs to be at least the same as the
appliance.
- Make sure the extention cord is not draped over the table or counter top, children
could pull it or you could trip over it.
INSTRUCTIONS FOR USE
First use :
Let clean water run through the coffee maker twice.
Open the lid of the water tank. Take out t he water tank and fi ll it up with cold water.
Place it back in the machine. Never use warm water.
Place a paper fi lter in the fi lter holder.
Fill the paper fi lter with the desired amount of coffee.
Place the carafe with the lid on the plate of the appliance.
Turn on the coffee maker by pressing the "on/off" button. The indication light will
light up.
When the coffee is fi nished, you can take off the carafe. If you want to take coffee
when the water is still running, the drip stop will prevent coffee dripping on the hot
plate.
ATTENTION : the drip stop only functions when the lid is on the carafe.
When the coffee is fi nished, you can take the carafe of the hot plate.
Afterwards place the carafe back on the hot plate.
As long as your coffee maker is on the coffee will be kept warm.
When no longer necessary, turn off the coffee maker.
After 2 hours the coffee maker will switch off automatically.
ATTENTION : let the appliance cool down for 5 min. between every time you make
coffee.
PROGRAMMING YOUR APPLIANCE
The timer makes it possible to program your coffee maker, so it will automatically
switch on at the desired hour.
SETTING THE CURRENT TIME
Place the plug in the socket. The display will show "12.00".
For setting the current time, press the "HR" button for setting the hours, press the
"MIN" button for setting the minutes.
PROGRAMMING
Fill the appliance with water and coffee.
Press the "PROG" button, until the word "TIMER" will appear on the display. Set the
15