Dometic PW1500 Mode D'emploi page 14

Disposal
Mounting the tensioning arm
Awnings with a width of 4 m to 5.5 m must be secured with a tensioning arm.
➤ Attach the pre-drilled end of the tensioning arm to the latch for the tensioning
arm using the hexagon head bolt and the hexagon nut with clamping part
(fig. l, page 2).
➤ Insert the lower section of the tensioning arm into the upper section (fig. l,
page 2).
6.4 Connecting the motor (optional)
➤ Connect the motor according to fig. m, page 2.
7 Disposal
➤ Place the packaging material in the appropriate recycling waste bins wherever
possible.
M
If you wish to finally dispose of the product, ask your local recycling centre
or specialist dealer for details about how to do this in accordance with the
applicable disposal regulations.
➤
12
PW1500, PW1750
EN