Whirlpool AKZ9 6290 IX Guide Rapide page 5

You can also set the grill level (3 = high, 2 = medium,
1 = low) at the same time.
Please note: Once the function has started, you can change
the temperature or the grill level by pressing
turning the knob directly.
DURATION
When the icon flashes on the display, use the
adjustment knob to set the cooking time you require
and then press to confirm.
You do not have to set the cooking time if you want to
manage cooking manually: Press
start the function.
In this case, you cannot set the end cooking time by
programming a delayed start.
Please note: You can adjust the cooking time that has been
set during cooking by pressing
change the hour and press
SETTING THE END COOKING TIME/
DELAYED START
In many functions, once you have set a cooking time
you can delay starting the function by programming
its end time.
Where you can change the end time, the display will
show the time the function is expected to finish while
the icon flashes.
If necessary, turn the knob to set the time you want
cooking to end, then press
the function.
Place the food in the oven and close the door: The
function will start automatically after the period of
time that has been calculated in order for cooking to
finish at the time you have set.
Please note: Programming a delayed cooking start time will
disable the oven preheating phase. The oven will reach the
temperature you require gradually, meaning that cooking times
will be slightly longer than those listed in the cooking table.
During the waiting time, you can use the knob to change the
programmed end time.
Press or to change the temperature and cooking
time settings. Press to confirm when finished.
or by
to confirm and
: Turn the knob to
to confirm.
to confirm and start
Please note: Delay to start functionality is not available for Grill
and Turbo Grill functions.
3.
ACTIVATE THE FUNCTION
Once you have applied the settings you require, press
to activate the function.
You can press and hold
function that is currently active.
4.
PREHEATING
Some functions have an oven preheating phase: Once
the function has started, the display indicates that the
preheating phase has been activated.
Once this phase has finished, an audible signal will
sound and the display will indicate that the oven has
reached the set temperature.
At this point, open the door, place the food in the
oven, close the door and start cooking by pressing
.
Please note: Placing the food in the oven before preheating has
finished may have an adverse effect on the final cooking result.
Opening the door during the preheating phase will pause it.
The cooking time does not include a preheating phase.
You can always change the temperature you want to reach
using the knob.
5.
END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
To extend the cooking time without changing the
settings, turn the knob to set a new cooking time and
press .
. 6 SENSE FUNCTIONS
th
TEMPERATURE RECOVERY
If the temperature inside the oven decreases during a
cooking cycle because the door is opened, a special
function will be activated automatically to restore the
original temperature.
While the temperature is being restored, the display
will show a "snake" animation until the set
temperature has been reached.
EN
at any time to pause the