Schneider Airsystems AM 22-8 Notice D'utilisation D'origine page 41

20 SHUT-DOWN DUE TO POWER FAILURE
In the event of transient power failure, the compressor will shut-down and re-start in automatic after 10 sec
(the set time to unload the oil separation tank to guarantee a correct restart).
WARNING: Take extra care when in this situation in order to avoid any damage to persons or
property caused by the drop in air pressure in the distribution installation.
21 ELECTRONIC CONTROLLER
All compressor settings are made by using the electronic controller AIRBASIC 2. For detailed instructions for
the controller, please refer to the AIRBASIC Controller User's Manual.
Controller regulates the output of the compressor. The following variables have been set in to the controller:
• target, unload and load pressures
• service intervals
• programmable I/O
• operational parameters
• alarm and shutdown limits
2-17