Publicité
Les langues disponibles
Les langues disponibles
Control Panel (See Fig.B)
jPOWER LED
kTEMPERATURE OR ELECTRICAL PROBLEM LED
See the buzzer types in Chapter 7. (See page 19)
lSERVICE REQUIRED LED
If it is lit up, it is due to a failure on the inverter or motor. Send the machine to your dealer or authorized
service facility to have their checkup or repair. (See page 19)
mMAINTENANCE LED
If it is lit up, send the machine to your dealer or an authorized service facility for inspection. (See page 21)
nQUIET MODE SWITCH
This machine also offers a power-saving operation Quiet mode that you can select when you want to
suppress the noises accompanying the operation, or when tripping of the circuit breaker is anticipated
during continuous operation. Press the Quiet mode switch to turn on this mode.
• A buzzer sounds with a beep and the LED lights up when the operation switching takes place.
• The switching is available independent of whether the compressor is in operation or stopped.
• Even when the circuit breaker tripped or you have disconnected the power plug from the outlet during
operation, status of the last operation is stored in memory.
• Even when the Quiet mode switch is pressed in a low temperature environment, the compressor con-
tinues running in the Normal mode for a while. After the compressor warms up sufficiently, it shifts to
quiet mode.
15
Publicité
