Publicité
Les langues disponibles
Les langues disponibles
Info button
(
I n f o b u t t o n
The Info button
can be used to display additional wash
(
cycle information.
Press the Info button
1.
Press the wash cycle button.
2.
Information on the selected wash cycle is indicated on
the display window at the top
To leave, press Info button
3.
Switching on the appliance for the first
time
When the dishwasher is switched on for the first time,
you are taken directly to the settings for switching on the
Settings
Switching on the appliance for
the first time
Language
Time format
Time setting
Water soft setting
Rinse aid setting
10
.
(8
.
@
( 8
.
Factory setting
American English
24h
12:00
°E 0 - 8 soft
Level 5
appliance for the first time. The following text is indicated
on the display window at the top
Scroll with < >
Set with + -
Leave with setup 3 sec.
The required settings for switching on the appliance for
the first time are listed in the table below.
Change the setting as follows:
Keep pressing button >
1.
is displayed.
Make the selection with setting buttons + -
2.
Press and hold the Info button
3.
The selected setting has now been stored.
Infotext
by pressing Info button
Language selection.
12h or 24h.
Set the current time.
Setting water hardness. When using Multitabs, select the
lowest setting.
Amount of rinse aid affects drying.
:
@
until the required setting
`
for 3 seconds.
(8
(
.
X
Publicité
