Publicité
Les langues disponibles
Les langues disponibles
TROUBLESHOOTING
IF YOUR BLENDER MALFUNCTIONS OR FAILS TO OPERATE
• Is the Blender plugged into a grounded
electrical outlet?
Plug the Blender into a grounded electrical
outlet.
• Is the fuse in the circuit to the Blender in
working order?
If you have a circuit breaker box, make sure
the circuit is closed. Try unplugging the
Blender, then plug it back into a grounded
electrical outlet.
• If Blender stops while blending:
The Blender becomes overloaded or
jammed when blending heavy ingredients.
It will automatically shut off to prevent
damage to the motor. Unplug the power
cord. Remove the Blender Jar from the
base and use a spatula to rearrange
ingredients in the Blender Jar.
If it's overloaded, divide contents into
smaller batches. For certain recipes, adding
liquid to the Blender Jar may also reduce
the load on the Blender.
W11435381B.indb 11
W11435381B.indb 11
• If the ingredients of a recipe aren't
blending:
There may be times when an air pocket
is created around the blade, causing the
ingredients to miss the blending blade.
Unplug the power cord. Remove the
Blender Jar from the base, and use a
spatula to rearrange ingredients in the
Blender Jar.
• If Blender stops while blending with
Personal Jar or Small Batch Jar:
If Blender stops, unplug the power cord.
Remove the Personal Jar or Small Batch
Jar from the base, and shake it a little bit.
Place it back on the base, and then turn the
Blender back on to continue regular use.
• If the problem cannot be corrected:
See the "Warranty and Service" sections.
Contact an authorized service center for
assistance.
Do not return the Blender to the retailer –
retailers do not provide service.
11
10/14/2020 9:32:15 PM
10/14/2020 9:32:15 PM
Publicité
