KitchenAid KSB13 Serie Mode D'emploi page 6

PREPARING AND USING THE BLENDER
4
5
6
IMPORTANT: Allow the Blender to fully stop before removing the Lid, Blender Jar, or pouring
out your blended ingredients.
7
USING PULSE MODE/ICE CRUSH MODE
Your Blender offers a Pulse/Ice Crush function with a soft start to avoid ingredient splatter.
When turning the Control Dial to the Pulse/Ice Crush (
at optimal speed to crush ice. This function will continue until you release the Control Dial,
returning to (O).
1
2
TIP: Use half of standard ice cube tray or 7-8 standard ice cubes at a time for blending. The Ice
Crush feature has been optimized to crush and chop ice without adding any liquid ingredients.
6
W11435381B.indb 6 W11435381B.indb 6
Turn the Control Dial from (O) to desired speed for
continuous operation. You may change desired speed
by turning the Control Dial at any time.
See the "Blender Function Guide" for more
information.
If blending hot liquids or ingredients, only use the full
size blender jar (48 oz / 1.4 L). Place the Lid securely on
the jar and the Center Cap locked in place.
It is recommended to operate only on speed (1) while
blending hot liquid or food.
When finished, turn the Blender off by returning
Control Dial to (O).
Unplug the Blender before removing the Blender Jar.
Tamper accessory: Remove the Lid Center Cap only.
Stir or press contents down towards the blade. Then,
place the Lid Center Cap back before resuming
blending.
P
) function, the Blender will operate
Place ingredients or Ice cubes into the Blender Jar.
Firmly secure Lid with Lid Center Cap on Blender Jar.
Turn and hold the Control Dial from (O) to Pulse/Ice
P
Crush ( ) function. The Blender will run at optimal
ice crush speed. When finished, release the Control
Dial to stop the Blender.
You may hold Control Dial on Pulse/Ice Crush (
function as per desired interval of time. See "Blender
Function Guide" for more information.
P
)
10/14/2020 9:32:13 PM 10/14/2020 9:32:13 PM