Moulinex Companion XL HF809 Mode D'emploi page 33

USING THE APPLIANCE
Plug in the appliance, set the On/Off switch (H) to 1, and the LCD screen (C) displays all
settings at "0" (See Fig. 9)
AUTOMATIC PROGRAM MODE
1- Press the program of your
choice (B1), a triangle appears
on the screen (C4) In the case
of the soups, slow cook,
steam and pastry programs,
successively pressing the
program button takes you to
the different sub-programs.
2- The pre-programmed settings can be
modified for the time of a recipe
(depending on the chosen recipe,
ingredients
prepared). Press the speed
selector (B2) or the cooking
temperature selector (B3) or the
time selector (B4), the setting
chosen will flash on the screen (C1-C2-C3).
3- Adjust the setting(s) using the +/- selector
(B6).
4- When you have finished
modifying all your settings,
press the "start" button
(B7) to start the program.
When your appliance is
using cooking mode, the red
indicator light (B3) lights up
to inform you that cooking
has started.
5- When the program has
ended, the appliance emits
3 beeps.
6- At the end of the sauce, soup, slow cook
In the 'sauces' program, P2 and 'slow cook'
P3 program, desserts and manual mode,
the appliance motor functions at a specific
speed, in order to preserve the preparation
and avoid it sticking to the bottom of the
bowl.
and quantities
To stop keep warm mode, simply press the
"stop" button (B7). If you open the lid, press
the locks (D2) or remove the bowl and keep
warm mode will be automatically stopped.
At the end of the sauce programs, slow cook
P2 and P3 and the dessert program; during the
keeping warm function, the motor will conti-
nue to operate so that the ingredients do not
stick to the bottom of the bowl.
At the end of kneading in the pastry
programs P1 and P2, the appliance
changes to "dough rising" mode at 30°C
for 40 minutes for your dough to prove. If
you open the lid, press the locks (D2) or
remove the bowl, the appliance changes to
pause mode and you have the possibility of
restarting it by pressing "start" again.
If you wish to stop this mode, press and
hold the "stop" button for 2 seconds.
7- Press the locks (D2) and then remove the
When the automatic program has started
up, you have the possibility of stopping the
appliance at any time by pressing the "stop"
button. The automatic program is then in
pause mode, you have the possibility of
restarting by pressing the
again. If you have chosen the wrong program
and if you want to cancel it, press and hold
the "stop" button for 2 seconds.
25
programs P2 and P3, steam cooking and
desserts, the appliance automatically
changes to keep warm mode for 45
minutes to maintain the preparation ready
for serving.
bowl assembly (D) (See Fig. 12).
EN
"start" button