DeWalt DCG414 Traduction De La Notice D'instructions Originale page 41

CORDLESS SMALL ANGLE GRINDER
DCG414
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
Power output
No-load/rated speed
Wheel diameter
Wheel thickness (max)
Spindle diameter
Spindle length
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745-2-3:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Surface grinding
Vibration emission value a =
h,AG
Uncertainty K =
Disc sanding
Vibration emission value a =
h,DS
Uncertainty K =
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN60745 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
Battery pack
Battery type
WALT one of the
e
Voltage
Capacity
Weight
DCG414
Charger
V 54
Mains voltage
DC
1
Battery type
Li-Ion
Approx. charging time of
W 1700
battery packs
min 9000
-1
mm 125
Weight
mm 6
The DCB118 charger accepts 18V Li-Ion XR and XR FLEXVOLT
M14
battery packs (DCB181, DCB182, DCB183, DCB183B, DCB184,
mm
DCB184B, DCB185 and DCB546).
kg 2.18
Fuses:
Europe
dB(A) 84
U.K. & Ireland
dB(A) 95
EC-Declaration of Conformity
dB(A) 3
Machinery Directive
m/s 5.9
2
m/s 1.5
2
Cordless Small Angle Grinder
DCG414
m/s 2 2.9
D WALT declares that these products described under
m/s 2 1.5 e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-3:2011
+A2:2013 +A11:2014 +A12:2014 +A13:2015.
These products also comply with Directive 2014/30/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
03.05.2016
V
DC
Ah
kg
V
AC
min 22 (1.3 Ah)
45 (3.0 Ah)
kg
230V tools
230V tools
WARNING: To reduce the risk of injury, read the
instruction manual.
EnGLIsh
DCB546
Li-Ion
18/54
6.0/2.0
1.05
DCB118
230
18/54 Li-Ion
22 (1.5 Ah) 30 (2.0 Ah)
60 (4.0 Ah) 75 (5.0 Ah)
60 (6.0 Ah)
0,66
TM
10 Amperes. mains
3 Amperes. in plugs
WALT at
e
WALT.
e
39