emerio PAC-127033.1 Mode D'emploi page 10


Close your window to secure the window kit in place. It is recommended that the gap between the window kit and
the sides of window should be sealed off for a maximum efficiency.

Attach the hose connector onto the air exhaust outlet at the back of the unit.

Adjust the length of the flexible exhaust hose, avoiding bends in the hose. Place the appliance near an appropriate
electrical outlet.
OPERATION
*Always let the appliance rest for at least 2 hours after moving it from one location to another.
Before use, check up whether the exhaust hose has been mounted properly. Plug in the appliance.
1. Power button
Press the power button to turn on the appliance. The appliance will start to work.
Press the power button again, the appliance will be turned off.
2. Mode function
- Use the control panel: Press the mode button to choose your desired working mode among cooling,
drying, fan and heating mode. The corresponding indicator light will turn on when the specific mode
is selected.
- Use the remote control: Press the buttons directly on the remote control to choose your desired
working mode. The corresponding indicator light will turn on when the specific mode is selected.
Note: The symbol "
mode is selected. No symbol for drying or fan mode.
"/" " will illuminate on the front digital display to indicate the cooling / heating
- 9 -