Publicité
Les langues disponibles
Les langues disponibles
INSTRUCTIONS FOR THE USER
Cooking timer:
If the oven is supposed to turn off after a specified duration, cooking timer can be set. It is named as semi-automatic operation.
1) Press and release button
2) Set the cooking duration using buttons
and
icon light on the display.
The set time is memorized after about 7 seconds; the current time of day is shown again on the display.
and
icons remain on the display. Select the required temperature and the oven function.
When cooking is completed, an audible signal will be heard for approximately 7 minutes, and the
Return control and thermostat knobs to the OFF position.
Press button
to cancel buzzer signal and press once again to return to manual operation.
Cooking time with delay:
If the oven is supposed to turn off at specified time, after having worked for a specified duration , cooking time and the cooking end time can
be set. In this case, you just give in the cooking duration and the time, when the food should be ready and the timer calculates when to start
cooking. It is named as full-automatic operation.
1) Enter cooking duration as described above. (for example say it is 17:30 o'clock now and cooking duration is set as 1 hour).
2 ) Press and release button
3) Set the turn-off (cooking end) time using buttons
The maximum cooking end time setting is limited to the current time plus 23 hours 59 minutes.
4) Turn the thermostat and function control knobs to the required settings.
Oven will not be switched on until the calculated cooking start time (according to the example, it is 18:30), that is the difference between the
cooking end time and the cooking duration.
When cooking is completed (according to the example at 19:30), an audible signal will be heard for approximately 7 minutes, and the
will flash. Return control and thermostat knobs to the OFF position.
5) Press button
to cancel the buzzer signal and press once again to return to manual operation.
Adjusting the buzzer tone:
1) Press button
until the "LX" (X=1, 2 or 3) flashes on the right two digits.
-
2) Set the tone using buttons
Default tone is L3.
Child lock activation / deactivation:
If not in any adjustment mode, press and hold button + about 5 seconds, to activate / deactivate the child lock,
on the display accordingly.
When the child lock is activated after a cooking program was activated, the buttons get locked, and pressing the buttons will have no effect.
This is to prevent your child interrupting or disturbing a cooking program which is in progress.
When the child lock is activated as no cooking program is in progress, again the buttons are locked but in addition, the oven gets inoperative
(Oven cannot be used manual). This is to prevent your child to activate the oven accidentally.
ATTENTION!
In case of main power loss for a short time (about 1.5 minutes), timer maintain s its status.
Child lock status and buzzer tone are memorized independent of the power los s duration.
until
start to flash.
-
+
and
within the range from 1 minute to 23 hours 59 minutes.
until the
icon starts to flash.
-
+
and
+
and/or
to set "L1", "L2" or "L3".
(for example 19:30).
icon disappears.
EN
icon starts to flash,
icon disappears.
icon appears/disappears
icon
25
Publicité
