Publicité
Les langues disponibles
Les langues disponibles
8. OSD (On-Screen Display) Operation
F7 Scan (SCAN)
Invoke the Auto Scan Mode by clicking the F7 field or pressing [F7]. This function allows you to cycle through available computers at regular intervals
so that you can monitor their activity without having to take the trouble of switching yourself.
• The selection of computers to be included for Auto Scanning is made with the Scan/Skip Mode setting under the F3 SET function (see page 15).
• The amount of time that each port displays for is set with the Scan Duration setting under the F3 SET function (see page 15). When you want to
stop at a particular location, press the [Spacebar] or [Esc] to stop scanning.
• If the scanning stops on an empty port, or one where the computer is attached but is powered off, the monitor screen will be blank, and the mouse
and keyboard will have no effect. After the Scan Duration time is up, the Scan function will move on to the next port.
• As each computer is accessed, an S appears in front of the Port ID display to indicate that it is being accessed under Auto Scan Mode.
• While Auto Scan Mode is in effect, the keyboard and mouse will not function. You must exit Auto Scan Mode in order to regain control of the
console.
• While in Auto Scan Mode, the scanning can be paused in order to keep the focus on a particular computer either by pressing P, or with a left click of
the mouse.
• To exit Auto Scan Mode, press the [Spacebar] or [Esc].
F8 Log Out (LOUT)
Clicking the F8 field or pressing [F8] logs you out of the KVM switch and blanks the Console screen. This is different from simply pressing [Esc] to
deactivate the OSD. With this function you must log in again to regain access to the KVM, whereas with [Esc], you are only logged out of the OSD screen.
Note: 1. When you reenter the OSD after logging out, the screen stays blank except for the OSD Main Menu. You must input your password before you can continue.
2. If you reenter the OSD after logging out and immediately use [Esc] to deactivate the OSD without having selected a port from the OSD menu, a Null Port message
displays on the screen.The OSD Hotkey will bring up the Main OSD Screen.
9. Firmware Upgrade Utility
9.1 Before You Begin
To prepare for the firmware upgrade, do the following:
1. From a computer that is not part of your KVM installation go to the
support section on tripplite.com and choose the model name that
relates to your device to get a list of available Firmware Upgrade
Packages.
2. Choose the Firmware Upgrade file you want to install (usually the
most recent) and download it to your computer.
3. Use the Firmware Upgrade Cable (provided with this unit), to
connect a COM port on your computer to the Firmware Upgrade
Port of your switch.
Note: When daisy-chaining KVM Switches, a firmware upgrade to station-1 will
upgrade all connected KVMs.
4. Shut down all of the computers.
5. From your KVM switch console, bring up the OSD and select the F4
ADM function. (See page 16.)
6. Scroll down to FIRMWARE UPGRADE. Press [Enter], then press [Y]
to invoke Firmware Upgrade Mode. For your reference, the current
firmware upgrade version displays on the screen.
18
Publicité
