Description; Function Range / Buttons - Kettler GOLF M Mode D'emploi Et Instructions D'entraînement

Description

The electronics assembly has the following functions:
• 2 personal memories for:
Training kilometres and time
Training presettings
Display of last training with average and maximum values
• KJoule/km/h or kcal/m/h settings
• Calculation of energy consumption depending on
speed and braking level
Function range
The four buttons will be described in short below.
DISP-SET
(press shortly)
• Switches from time display to ready for training
• Switches to next input or display.
Settings or values will be accepted.
Settings or values will be accepted.
DISP-SET (press longer) RESET
• Deletes display for a reset.
Only possible in standstill.
Minus – / Plus +
With these function buttons, you can change the valu-
es in the different input data before the start of the
training
• Press longer > fast run through the values
• Press "Plus" and "Minus" together: input data will
be reset )
Minus – (press shortly when time is displayed)
• Display of last training data (MEM) and total kilo-
metres (ODO)
Minus – (press longer when time is displayed)
• Set time (TIME)
• Switch from ME to IM (SETTINGS)
ME = [24h], [KJoule], [kilometres] -display
IM = [12h], [Kcal], [miles] -display
• Activate Save training presettings.
REC (recovery pulse with fitness mark)
By pressing this function button, the recovery pulse
function is started and a fitness grade is calculated.
Persons
• Display of training kilometres and time of person 1
or person 2.
• Display of previous training data.
Measuring the pulse
The measurement of the pulse can be carried out by
means of 3 sources:
1. Ear clip - The plug is put into the socket.
2. Hand pulse - The connection is situated at the back
of the display;
3 Breast belt with plug recipient (available as acces-
sory) - Please observe the respective instructions.
G
G
13
GB