Moving And Storage - Tunturi T30 Mode D'emploi

NOTE! DON'T PUSH IN THE SAFETY SWITCH BEFORE
UNPLUGGING THE MACHINE'S POWER CORD.
If you leave the treadmill plugged in after turning
off the console, there will still be current running
to the console. This treadmill is equipped with a
safety control program that will automatically shut
down the machine after six hours of no use. In the
event of an automatic shut down, please follow the
procedure below to restart the treadmill:
A. Unplug the power cord form the machine's
socket.
B. Replug the power cord into the machine's socket to
restart the machine.
MOVING AND
STORAGE
After assembly is complete, you may fold the
machine into the upright position for storage. To
hold the machine, raise the desk until it locks in to
position.
NOTE! Make sure you hear the click sound of the
deck locking into position. This is to ensure the deck
is locked in place and will not drop back down.
NOTE! Make sure the treadmill's elevation is at 0
before folding the deck. If the elevation is not at 0,
folding will damage the mechanism.
SAFETY SWITCH
ON/OFF
POWER CORD
9 9
First to step on the pedal, second push the frame
toward the console then leave the deck lower to the
fl oor.
NOTE! This machine has a built-in safety unfolding
feature to help the deck lower slowly. Please make
sure there are no children or other things under the
deck when you lower it.
TO MOVE THE TREADMILL
Before moving the T40, be sure the power cord is
unplugged from the wall and the treadmill. Fold
up the running deck until it is locked and push the
equipment on the transportation wheels. Lower
the treadmill carefully onto the fl oor. Hold the
handlebar to move forward the treadmill.
NOTE! Transport the treadmill with extreme caution
over uneven surfaces, for example over a step. The
treadmill should never be transported upstairs using
ENGLISH
T30 - OWNER'S MANUAL