Melitta LatteSelect F63/0-201 Mode D'emploi page 23

(e.g. Americano), for milk froth, warm milk
or hot water. The button also cannot be
used when co ee powder is used.
5.3 Changing settings during
preparation
You can still change the brewing strength
and the beverage quantity during prepa-
ration.
You can set the brewing strength during
the grinding process by pressing the
"Brewing strength" button.
You can change the beverage quantity by
turning the "Rotary Switch".
These settings only apply to the current
preparation.
5.4 Changing default settings
You can change the default settings for the
brewing strength, the beverage quantity
and the temperature.
For example, to change the brewing
strength for an espresso, you need to navi-
gate to the Direct keys > Espresso > Strength
menu and select the required brewing
strength.
The modi ed default settings are stored.
You can change the default settings at any
time, however.
6 Personal settings
– My Co ee
The My Co ee function allows you to save
individual settings for up to six persons in
a user pro le. This allows you to choose
your individual preferences in terms of
brewing strength, beverage quantity and
temperature.
6.1 Setting up user pro le
Six user pro les with preset user names
are set up in the My Co ee menu. You can
change the user names at any time.
Select a user name in the My Co ee
ƒ
menu and then select Change name.
Enter a new user name with the "Rotary
ƒ
Switch".
The user pro le is automatically activated
after the new user name is entered. You
Personal settings – My Co ee
can also deactivate a user pro le if you do
not want to use it.
Navigate to the My Co ee > User name
ƒ
> Enabled/disabled menu, to activate or
deactivate the user pro le.
6.2 Select personal settings
As soon as the user pro le is set up, you
can select the personal settings for the
brewing strength, the beverage quantity
and the temperature.
For example, to select the beverage quan-
tity for a cappuccino, you need to navigate
to the My Co ee > User name > Cappuccino
> Co ee amount menu and select the
required beverage quantity.
The personal settings are stored. You can
change the settings at any time, however.
6.3 Preparing beverages with
personal settings
To prepare a beverage with the My Co ee
function, you need to press the "my reci-
pes" button repeatedly until the required
user name is displayed. Start the prepara-
tion by pressing the corresponding direct
key.
If a beverage is not prepared within 3 min-
utes, the appliance switches to the ready
display.
You can exit the My Co ee function at any
time by pressing the "my recipes" button
repeatedly until the ready display appears.
7 Basic settings
7.1 Language and time
You can change the language for the
display in the menu under Settings>
Language.
You can change the time in the menu
under Settings > Clock.
If you want to prevent the time being
shown on the display, set the time to 00:00.
7.2 Energy save mode
Energy save mode lowers the heating tem-
perature and switches o the illumination.
23