Agilent Technologies Turbo-V 700 ICE Mode D'emploi page 200

16 Instructions for Use
Use
Figure 3
1 Logic input signals connectors (mating connector supplied with link).
2 Logic signals, pump current monitor and activation frequency output connector.
3 Power out socket (120 Vac, 1 A) for power supply to the optional devices (vent device,
primary pump activation relay, etc).
4 Pump cable socket.
5 Controller power entry module consisting of mains fuses, voltage change over, mains
socket and EMC filter.
6 Heater jacket power cord socket.
7 Provision for RS-232 - RS-422 - RS-485 communication port connector (provided as an
option).
8 Power switch.
9 Heater jacket power supply fuse.
10 Flow meter connection cable socket.
11 Ground connection.
200/262
Controller 969-9446 and 969-9546 rear panel
Turbo-V 700 ICE Controller User Manual / 87-900-904-01 (L)