PX Series Balance
5.6.5 Output Format
Select to use which format to print:
OHAUS – PX
SICS: the Mettler Toledo format.
ST: the Sartorius format.
OHAUS – AR
OHAUS – PA
5.6.6 Batch Printing
Off = Disable batch printing.
On = Enable batch printing.
Note: for how to use batch weighing, please refer to the Weighing section for
details.
5.6.7 Label Printing
Off = Disable label printing.
On = Enable label printing.
There is 1 built-in label template:
- 100mm x 75mm, which is designed based on label size "100mm x 75mm".
This template includes all basic information "Data/Time", "Balance Name",
"Balance ID", "Gross Weight", "Tare Weight", "Net Weight", and "Signature".
The template can be edited via OHAUS Label Designer. Please go to the
website below to download the software.
https://dmx.ohaus.com/WorkArea/DownloadAsset.aspx?id=28916
For how to use the software, please contact an authorized dealer to obtain the
software's instruction.
5.6.8 Auto Print
Off
= disabled
1
On Stability
= printing occurs each time the stability criteria are met.
2
Print Interval
= printing occurs at the defined time interval.
Continuous
= printing occurs continuously.
1
When On Stability is selected, set the conditions for printing.
Load
= Prints when the displayed load is stable.
Load and Zero = Prints when the displayed load and zero readings are stable.
2
When Print Interval is selected, set the time interval using the numeric keypad.
Settings of 1 to 3600 seconds are available. Default is 0.
5.6.9 Header
On = the header is printed.
Off = the header is not printed.
5.6.10 Date and Time
On = the date and the time are printed.
Off = neither the date nor the time is printed.
5.6.11 Balance ID
On = the balance ID is printed.
Off = the balance ID is not printed.
EN-33