OHAUS Pioneer PX6202M Manuel D'instruction page 23

PX Series Balance
10. The total weight will display.
11. Pressing the Function / Mode button switches
between the total weight, the weight of component 1,
component 2 and so forth (as well as the weight of
the filler if added).
4.7 Additional Features
Weigh Below
Note: Ensure the balance has been leveled and calibrated.
The PX balance is equipped with a weigh below hook for weighing below the balance (as shown in the figure
below).
Before turning the balance over, remove the pan and draft shield elements (if present) to prevent damage. Do not
place the balance on the pan support cone or load cell pins.
To use this feature, remove power from the balance, then remove the protective cover for the weigh below
opening.
Power on the balance, and then use a string or wire to attach items to be weighed.
Weigh Below
protective cover
EN-21
Weigh Below hook