Güde Eco Wheeler 464.2 R LI-ES Traduction Du Mode D'emploi D'origine page 37

Any damaged or disposed devices must
be delivered to appropriate collection
centres.
Batteries, oil, and similar substances must
not enter the environment.
Protect against humidity
This side up
Charger
Caution!
Read the Operating Instructions
Charger to be used in closed spaces only.
T2A
Appliance protection
Protection class II
Type
Protect the battery against heat and fire.
Protect the battery against water and
moisture.
Protect the battery against temperatures
above 40°C.
MAX. 40°C
Do not throw the batteries in household
waste.
Deliver the batteries to a collection centre
of old batteries where they will be recy-
cled in an environmentally friendly way.
Safety Instructions
WARNING
Read all safety warnings and all instructions, inclu-
ding those given in the accompanying brochure.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Keep children and other persons including animals in
a safe distance when using the appliance. Minimum
safe distance is 5 m.
Wear personal protective equipment.
Wear solid shoes and long trousers. Never use the
appliance when barefooted or in light sandals.
Wear protective gloves if necessary.
Use the appliance in broad daylight or in a well-lit
environment.
Check carefully the terrain where the appliance is
being used and remove any items that could get
caught and be thrown away.
Avoid operating the equipment in wet grass, where
feasible
Fuel is highly flammable.
Keep the fuel in suitable containers only.
The appliance may only be refuelled outdoors and
not near open fire or burning cigarettes.
Refuel before starting the appliance. If the engine
is running or still hot, it must not be refuelled or
the tank cover opened.
Make sure the fuel does not overflow. If the
fuel overflows, the engine must not be started.
Remove any dirt from the appliance and prevent
any attempt at ignition until fuel fumes have
evaporated.
Replace all fuel tank and container caps securely.
The engine must necessarily be filled with engine oil
before being put into operation for the first time.
Check the oil level whenever the appliance is to be
put into operation. Add engine oil if necessary.
Carry out a visual inspection before any use to make
sure the appliance, especially the cutting tools,
fastening parts and the entire cutting unit are not
damaged.
Before using, always visually inspect to see
that the blades, blade bolts and cutter assembly
are not blunt, worn or damaged. Replace worn or
damaged blades and bolts in sets to preserve
balance;
The protective equipment on the appliance is
strictly prohibited to be disassembled, changed,
used in conflict with the designation and it is
prohibited to attach any protective equipment of
other manufacturers.
The appliance must not be used if damaged
or safety equipment is defective. Replace any
worn-out and damaged parts.
Do not operate the engine in a confined space where
dangerous carbon monoxide fumes can collect.
Do not start the engine before your feet are in a safe
distance from the cutting tools.
ENGLISH
37