Topcom Butler 1000 Mode D'emploi page 56

Butler 1000
• If the handset dialled is answered, you can have an internal conversation. Press the Line key
and the external call is transferred.
• If the handset dialled is not answered, press the Down key
again.
4.5 Out of Range Warning
If the handset is out of range of the base unit, a warning signal will sound.
• 'SEARCHING' appears on the display and the symbol
• Move closer to the base unit.
• As soon as you are back within range of the base unit, a signal sounds and the symbol
stops blinking.
4.6 Setting the speaker volume
Use the Volume/Ringer key
from 5 levels. The telephone is set to level '3' by default.
During a call, you can change the volume as follows:
• Press the Volume/Ringer key
• The volume level currently set appears on the display.
• Use the number keys to set the desired level (1-5).
• Press the Volume/Ringer key
Note : You have 8 seconds to set the desired volume; if you do not, the telephone returns to standby
mode and the volume remains unchanged.
4.7 Call Duration Indicator on the Display
As soon as you press the Line key
E.g. " 01-20 " for 1 minute and 20 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.8 Turning off the microphone (mute)
It is possible to turn off the microphone during a call by pressing the Delete/Mute key
you can speak freely without the caller being able to hear you.
• You are on the phone. The Line/Charge indicator
the Call symbol
• Press the Delete/Mute key
• The symbol 'X' appears on the display (
• When you want to resume the conversation, press the Delete/Mute key
• The symbol 'X' disappears from the display (
hear you again.
4.9 Pause key
If you dial a telephone number and you would like to add a pause to this number, press the
Pause key at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.
All manuals and user guides at all-guides.com
/ to set the volume of the speaker (handset). You can choose
/ .
/ to confirm your selection.
the call duration appears on the display (minutes-seconds).
appears on the display.
to turn off the microphone.
).
to speak to the external caller
blinks on the display.
(LED) on the base unit will blink and
). The person on the other end of the line can
57 57 57 57 57 57 57 57 57 57 57 57 57 57
. Now
again.