Publicité
Les langues disponibles
Les langues disponibles
Getting to know your
appliance
Please fold out the illustrated last page.
These operating instructions refer
to several models.
The features of the models may vary.
The diagrams may differ.
Fig. !
A
Refrigerator compartment
B
Cool-fresh compartment
1-5
Controls
6
Light, refrigerator compartment
7
Glass shelf
8
Partition with humidity controller
9
Vegetable container
10
"Cool-fresh" container
11
Door shelf
12
Shelf for large bottles
Controls
Fig. "
1
On/Off button
Serves to switch the appliance on
and off.
2
"super" button
Is used to switch on the super
cooling (see chapter entitled
"Super cooling").
3
Temperature selection button
Press this button to set the
temperature.
4
Temperature display
The numbers correspond
to the set refrigerator
compartment temperatures in °C.
5
Alarm button
Used to switch off the warning
signal, see chapter "Alarm
function".
Switching the
appliance on
Fig. "
Switch on the appliance with the On/Off
button 1.
The temperature display 4 indicates the
set temperature.
The appliance begins to cool. Light is
switched on when the door is open.
We recommend a factory setting of +4
°C in the refrigerator compartment.
Do not store perishable food warmer
than +4 °C.
Operating tips
After the appliance has been switched
■
on, it may take several hours until the
set temperature has been reached.
Do not put any food in the appliance
beforehand.
The front sides of the housing are
■
partly heated slightly. This prevents
condensation in the area of the door
seal.
en
25
Publicité
