Pioneer Premier DEH-P8MP Mode D'emploi page 29

MP3/WMA/WAV Player
Note
When you turn the tag display on, the unit returns
to the beginning of the current track in order to
read the text information.
Using compression and BMX
Using the COMP (compression) and BMX
functions let you adjust the sound playback
quality of the CD player. Each of the functions
have a two-step adjustment. The COMP func-
tion balances the output of louder and softer
sounds at higher volumes. BMX controls
sound reverberations to give playback a fuller
sound. Listen to each of the effects as you se-
lect through them and use the one that best
enhances the playback of the track or CD that
you are listening to.
1 Use Multi-Control to select COMP.
COMP appears in the display.
2 Press Multi-Control to select your favor-
ite setting.
Press Multi-Control repeatedly to switch be-
tween the following settings:
COMP/BMX :OFFCOMP 1COMP 2
COMP/BMX :OFFBMX1BMX2
Displaying text information
on MP3/WMA/WAV disc
Text information recorded on an MP3/WMA/
WAV disc can be displayed.
When playing back an MP3/
WMA disc
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
: file name : folder name and
name : file name and
:track title and :artist name : artist
name and : album title : album title and
:track title :comment and bit rate
# When playing back MP3 files recorded as VBR
(variable bit rate) files, the bit rate value is not dis-
played even after switching to bit rate. (VBR will
be displayed.)
# When playing back WMA files recorded as
VBR (variable bit rate) files, the average bit rate
value is displayed.
# When you have turned tag display off, you
cannot switch to track title, artist name, album
title or comment.
# If specific information has not been recorded
on an MP3/WMA disc, title or name is not dis-
played.
# With some applications used to encode WMA
files, album names and other text information
may not be correctly displayed.
When playing back a WAV disc
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
:file name :folder name and
name :file name and
sampling frequency
# If specific information has not been recorded
on a WAV disc, name is not displayed.
# You can only play back WAV files in the fre-
quencies 16, 22.05, 24, 32, 44.1 and 48 kHz
(LPCM), or 22.05 and 44.1 kHz (MS ADPCM). The
sampling frequency shown in the display may be
rounded.
Section
06
: file
: folder name
:file
:folder name
29
En