Section
05
Built-in CD Player
7
Press BAND to return to the playback
display.
Notes
! Titles remain in memory, even after the disc
has been removed from the unit, and are re-
called when the disc is reinserted.
! After data for 48 discs has been stored in
memory, data for a new disc will overwrite the
oldest one.
! If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
! When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.
Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artists name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displaying titles on CD TEXT discs
You can display the title of any disc that has
had a disc title entered.
% Press DISPLAY.
Press DISPLAY repeatedly to switch between
the following settings:
: track title : disc title and
name : disc artist name and
: track title and
track artist name and
# If specific information has not been recorded
on a CD TEXT disc, title or name is not displayed.
24
En
: disc artist
: track title
: track artist name :
: track title
Scrolling titles in the display
This unit can display the first 17 letters of disc
title, disc artist name, track title and track ar-
tist name. When the text information is longer
than 17 letters, you can scroll the display as
follows.
% Press DISPLAY and hold until the title
begins to scroll through the display.
The titles scroll.
Note
When Ever Scroll is set to ON at the initial setting,
CD text information scrolls continuously in the
display. If you want to display the first 17 charac-
ters of text information temporarily and scroll
from the beginning, press and hold DISPLAY.
About Ever Scroll, refer to Switching the Ever
Scroll on page 56.
Selecting tracks from the track
title list
Track title list lets you see the list of track titles
on a CD TEXT disc and select one of them to
play back.
1
Press LIST to switch to the track title list
mode.
2
Use Multi-Control to select the desired
track title.
Turn to change the track title; press to play.
# You can also change the track title by pushing
Multi-Control up or down.
# If you do not operate the list within about 8
seconds, the track title list mode is cancelled
automatically.