Belkin F5D8231-4 Mode D'emploi page 52

Using the Web-Based Advanced User Interface
Setting WEP Encryption
Note to Mac users:
Apple AirPort . To configure encryption for your Mac computer, set the
® ®
encryption using the manual method described in the next section.
1.
Select "128-bit WEP" or "64-bit WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter you
WEP key manually by typing in the hex WEP key manually, or
you can type a passphrase in the "PassPhrase" field and click
"Generate" to create a WEP key from the passphrase. Click
"Apply Changes" to finish. You must now set all of your clients to
match these settings.
3.
Encryption in the Router is now set. Each of your computers on
your wireless network will now need to be configured with the
same passphrase. Refer to the documentation of your wireless
network adapter for information on making this change.
The "Passphrase" option will not operate with
50 50
1
2
3
4
5
6
7
8
9
10