Télécharger Imprimer la page

LA NORDICA CARILLON 4:3 Instructions Pour L'installation, L'utilisation Et L'entretien page 18

Publicité

Les langues disponibles

Les langues disponibles

3.1. CLEAN AIR ACT RESTRICTOR KIT – DEFRA – (ONLY
FOR UK SMOKE CONTROL AREAS) (Carillon 4:3 / 16:9
ONLY)
To comply with the requirements of the United Kingdom Clean Air Act, for
use of appliances in smoke control areas, a permanent stop (SF07224)
must be fitted to prevent closure of the secondary air control beyond 40%.
This should be fitted as shown in Picture 3 ( CARILLON 4:3 / 16:9 ONLY ).
4.
FIRE SAFETY MEASURES
While installing the appliance, it is necessary to respect the following safety
measures:
a) In order to ensure sufficient thermal insulation, respect the minimum
safety distance from objects or furnishing components flammable and sensitive to heat (furniture, wood
sheathings, fabrics. etc.) and from materials with flammable structure (see paragraph 18 A1-A2). All the
minimum safety distances are shown on the product data plate and lower values must not be used.
b)
In front of the hearth, in its radiation area and its rotation space (+- 45° ) there must not be any fl ammable object
or construction material sensitive to the heat at least within 100 cm; This distance can be reduced to 40 cm if you
will install in front of the element to protect a retro ventilated and heat resistant protection.
c) If the product is installed on a non totally refractory floor, one must foresee a fireproof background. The floors
made of inflammable material, such as moquette, parquet or cork etc., must be replaced by a layer of no-
inflammable material, for instance ceramic, stone, glass or steel etc. (size according to regional filing). The
platform must stick out 50 cm in front and 30 cm sideways, considering also the rotation field of the stove. (see
paragraph 18 B1-B2).
d) no flammable components (e.g. wall units) must be present above the product.
The stove must work exclusively with inserted ash drawer.
Solid combustion residuals (ashes) must be collected in an air-tight and fire-resistant container. The appliance must
never be switched on when there are gaseous emissions or vapours (for example glue for linoleum, gasoline etc.). Do
not deposit flammable materials close to the same.
During the combustion will be spread thermal energy which warms up the surfaces, the door, the fireplace glass, the
handles and knobs, the smoke pipe and the front side of the stove. Please avoid the contact of these parts without
gloves or the relevant tools.
Warn children of the danger and keep them away during the
operation of the stove.
The use of a wrong or wet fuel causes the formation of creosote deposits
in the flue and will fuel a chimney fire.
4.1.
FIRST-AID MEASURES
Should any fire arise in the stack or in the flue:
a) Close the feeding door and the ash drawer door.
b) Close the registers of combustion air
c) Extinguish the fire using carbon dioxide fire-fighting means
(CO
dust).
2
d) Seek immediate intervention of FIRE BRIGADE.
DO NOT EXTINGUISH FIRE USING WATER JETS
When the fire has been extinguished, let the flue check by an expert to
find possible cracks and permeable points.
5.
FLUE
Essential requirements for a correct operation of the device:
the internal section must be preferably circular;
be thermally insulated and water-proof and produced with
materials suitable to resist to heat, combustion products and
possible condensates;
not be throttled and show a vertical arrangement with deviations not
greater than 45° ;
if already used, it must be clean;
18
CARILLON 4:3 – CARILLON 16:9 – CARILLON CLASSIC
(1)
(3)
(1)
AISI 316 steel flue with double
chamber insulated with material resistant
to 400° C. Efficiency 100% excellent.
(2) Refractory flue with double insulated
chamber
lightweight concrete. Efficiency 100%
excellent.
(3) Traditional clay flue square section
with cavities. Efficiency 80% excellent.
(4) Avoid flues with rectangular internal
section whose ratio differs from the
drawing. Efficiency 40% poor.
7196755 – EN
Picture 3
(2)
(4)
Max.
A+1/2A
A+1/2A
and
external
coating
Picture 4
A
in

Publicité

loading